Home 丨 Solutions 丨 Demolition Waste Sorting Solution
Demolition Waste Sorting Solution
The demolition waste (construction and demolition waste) sorting equipment production line is an industrial system designed to convert mixed building demolition waste into clean recycled aggregates and recyclable resources. It primarily employs a “crushing and separation + multi-stage sorting” process to address the challenges posed by the complex composition of demolition waste, which contains large amounts of rebar and lightweight materials.
The demolition waste (construction and demolition waste) sorting equipment production line is an industrial system designed to convert mixed building demolition waste into clean recycled aggregates and recyclable resources. It primarily employs a “crushing and separation + multi-stage sorting” process to address the challenges posed by the complex composition of demolition waste, which contains large amounts of rebar and lightweight materials.
Core Advantages
Extremely High Resource Recovery Rate
Through multi-stage crushing and high-precision sorting (including magnetic separation, air classification, and AI-powered sorting), the system converts concrete blocks, bricks, and tiles into high-quality recycled aggregates. The resource recovery rate typically exceeds 90%, with some advanced production lines reaching up to 95%, truly turning waste into treasure.
Comprehensive intelligent sorting capabilities
The system not only relies on strong magnetic separation to recover rebar (with a recovery rate of ≥95%) but also utilizes air classification and AI vision technology to precisely separate lightweight materials such as plastic and wood. The advanced AI system identifies materials in milliseconds, achieving a sorting accuracy rate exceeding 98%, thereby ensuring the purity of the recycled aggregates.
Flexible Adaptability to Various Scenarios
The equipment is available in fixed (suitable for large-scale disposal sites with high throughput) and mobile (vehicle-mounted design, capable of entering demolition sites) configurations. Mobile units require no hardened ground and can process waste on-site, significantly reducing transportation costs and secondary pollution.
Superior Environmental Performance and Durability
The entire line features a fully enclosed design and intelligent negative-pressure dust collection, keeping dust emission concentrations below 10 mg/m³ and maintaining low noise levels. Core components are made of high-wear-resistant alloys, ensuring high continuous operation rates and significantly lower maintenance costs compared to traditional equipment.
Automation for Labor Reduction and Efficiency
From feeding and crushing to sorting, the system features fully automated PLC control, reducing manual intervention. The sorting process, which previously required a large workforce, is now automated, requiring only a small number of personnel for monitoring, thereby significantly reducing labor costs and safety risks.
Scope of Application
Suitable Materials: Primarily targets waste generated from the demolition of various buildings, including waste concrete blocks, red bricks, roof tiles, mortar blocks, as well as mixed-in rebar, wood, plastic doors and windows, glass, rubber, and other materials.
Application Scenarios
Urban Demolition and Renovation Sites
Utilizing mobile production lines to crush and screen waste directly at the demolition site into recycled aggregates, which can be used for on-site backfilling or roadbed construction.
Construction Waste Landfills/Resource Recycling Plants
Large-scale fixed production lines centrally process construction and demolition waste generated in cities, producing recycled aggregates and manufactured sand of various particle sizes on a large scale for use in ready-mix concrete or brick manufacturing.
Infrastructure Projects
Processing concrete waste generated by road renovations, bridge demolitions, and similar projects.
Request a Customized Solution
We will provide customers with a variety of comprehensive services, including installation and commissioning service, technical training, maintenance, etc.
Research on the recycling of used lithium-ion batteries primarily focuses on recovering high-value precious metals—specifically cobalt and lithium—from the cathode. Lithium-ion battery recycling production lines are suitable for the disassembly and recycling of pouch batteries, cell phone batteries, casing batteries, and cylindrical batteries. The final products include graphite powder, lithium aluminum cobalt oxide, and copper.
Decommissioned wind turbine blades are cut into large pieces, fed into a coarse crusher via a chain conveyor, then processed through magnetic separation, fine crushing, and sorting to produce fibers and small pieces, and finally ground into powder by a grinding system.
Equipment for recycling waste solar panels uses physical crushing and sorting to extract silicon powder, copper powder, and plastic, all of which have high market value.
A large-scale solid waste treatment production line is an industrial system designed to process solid waste—such as construction debris, hazardous industrial waste, and municipal solid waste—through “reduction, harmless disposal, and resource recovery.”
We specialize in the EPC general contracting of solid waste treatment plants, providing safe, efficient and compliant one-stop solutions for urban and industrial solid waste disposal through integrated full-process services including design, procurement, construction, commissioning and operation and maintenance
Implement the concept of first sorting andre-sorting, through a variety of screening andsorting equipment reasonable collocation, fast andaccurate sorting of materials, good sorting effect,high resource recovery rate.
Screening treatment of domestic waste serves as the core pretreatment link for the resource utilization, reduction, and harmless disposal of waste. Relying on mechanical screening technology, mixed waste is accurately classified and separated according to differences in particle size, density, and morphology, laying a foundation for subsequent targeted disposal.
The drum screen can be used for construction waste, domestic waste, stale waste, construction waste, etc. The drum screen is a screening equipment that classifies materials based on their particle size.
The bouncing screen is a device that sorts materials based on the size, density, and shape of different components in the sorted materials. It is ideal equipment for handling and sorting domestic waste, old waste, construction waste, decoration waste, and other types of garbage.
The shredder adopts dual-shaft independent drive, which generates corresponding compression on materials during production to achieve automatic feeding function. With a unique cutter shaft structure and four-corner rotating cutters, it will not experience shaft winding or equipment jamming during low-speed and high-torque operation, thus improving production efficiency.
The horizontal hydraulic baling machine uses hydraulic power as its driving force and is driven by a hydraulic cylinder to push the baling cart to complete the baling. The hydraulic system is composed of several parts, including the oil tank, power mechanism (hydraulic pump), control mechanism (control valve), hydraulic pipelines, and actuator (hydraulic cylinder).
Based on aerodynamics and negative pressure control technology, the negative pressure air separator realizes precise separation of light and heavy materials by utilizing the differences in material density and suspension speed.
The positive pressure air separator is a device that relies on aerodynamic principles to efficiently physically separate mixed materials according to differences in density and specific gravity through controllable positive pressure air flow.
The process of separating a mixture of loose materials of varying particle sizes into several different grades by passing them multiple times through a single-layer or multi-layer screen with uniformly distributed apertures is known as screening.
